The SYSTEM 8 SmartSwitch is a fully programmable, 2-channel USB interface designed to operate exclusively with ABI Electronics' SYSTEM 8 Ultimate software and test equipment.Consisting of a hardware plug-and-play module that connects to a full-size USB port, the product provides two channels that can take on up to four switch inputs. These inputs can be provided by standard triggering mechanisms such as foot or hand switch, safety buttons, conveyors and compatible sensors. The operator can configure how each input should be interpreted by ABI's software through a built-in, user-friendly control panel available in SYSTEM 8 Ultimate.Setting up the SmartSwitch is simple. A list of possible actions and commands associated to ABI's test instruments, applications and the TestFlow Manager is embedded in the SmartSwitch Control Panel. When used within a TestFlow, the SmartSwitch set-up will be recorded and recalled automatically the next time the user runs the same TestFlow file.The product enables the user to keep their eyes on the PCB while performing a test. They can activate the device when they are ready to move on.The interface can be used to interact with existing SYSTEM 8 instruments as well as the TestFlow Manager. Users can create, save and recall configuration profiles for the most used SYSTEM 8 instruments.The product enables stop/start data acquisition without the use of a mouse. Events can be easily triggered once cables and probes have been positioned correctly.
